home *** CD-ROM | disk | FTP | other *** search
/ EnigmA Amiga Run 1995 November / EnigmA AMIGA RUN 02 (1995)(G.R. Edizioni)(IT)[!][issue 1995-11][Skylink CD].iso / earcd / docs / lwml9505.lha / LWML9505.TXT / 000326_owner-lightwave@webcom.com_Fri May 26 03:37:05 1995.msg < prev    next >
Internet Message Format  |  1995-06-03  |  2KB

  1. Received: by webcom.com
  2.     (1.37.109.15/16.2) id AA284664625; Fri, 26 May 1995 03:37:05 -0700
  3. Return-Path: <owner-lightwave@webcom.com>
  4. Received: from inet-gw-3.pa.dec.com by webcom.com with SMTP
  5.     (1.37.109.15/16.2) id AA284604620; Fri, 26 May 1995 03:37:00 -0700
  6. Received: from enet-gw.pa.dec.com by inet-gw-3.pa.dec.com (5.65/24Feb95)
  7.     id AA24564; Fri, 26 May 95 03:35:12 -0700
  8. Received: from marbls.enet by enet-gw.pa.dec.com (5.65/09May94)
  9.     id AA11671; Fri, 26 May 95 03:31:18 -0700
  10. Message-Id: <9505261031.AA11671@enet-gw.pa.dec.com>
  11. Received: from marbls.enet; by decwrl.enet; Fri, 26 May 95 03:31:19 PDT
  12. Date: Fri, 26 May 95 03:31:19 PDT
  13. From: 26-May-1995 0631 <leimberger@marbls.enet.dec.com>
  14. To: "mcoats@qnet.com"@24580.enet.dec.com
  15. Cc: lightwave@marbls.enet.dec.com
  16. Apparently-To: lightwave@webcom.com
  17. Subject: Re: Stencil
  18. Sender: owner-lightwave@webcom.com
  19. Precedence: bulk
  20.  
  21.  
  22.  
  23. On Thu, 25 May 1995, John Gross wrote:
  24. > Remember, if you are just stencilling fonts onto polys, there's no need 
  25. > to extrude the font. By using Drill (not Solid Drill) you can stencil (or 
  26. > any of the other operations) along any axis. The stencil fonts don't even 
  27. > have to be touching the "cutee". Of course, if you are stenciling into 
  28. > something not lined up on X, Y or Z, then you would want to extrude and 
  29. > intersect like Joe mentioned...
  30. > JG
  31.  
  32. >>This is not entirely correct.  By doing the above, the cutee would be 
  33. >>stenciled though the entire object.  If you only want the logo stenciled 
  34. >>on one side of the object you will need to use the extruded cutee and 
  35. >>use solid drill.
  36.  
  37. Manny,
  38.  
  39.   This works for you as well as against you. When I did my nosecone I
  40.   ended up with a nice disk on each side matching exactly. When I did my
  41.   missile door I ended up with the number on the inside and outside surfaces.
  42.   Not what I wanted, did an undo selected the outside surface only redid
  43.   solid drill and ended up with the number only on the highlighted surface.
  44.  
  45.                                 bill
  46. --
  47. 26-May-1995 0631 <leimberger@marbls.enet.dec.com> sent this message.
  48. To Post a Message           : lightwave@webcom.com
  49. Un/Subscription Requests To : lightwave-request@webcom.com
  50. (DIGEST)                 or : lightwave-digest-request@webcom.com
  51. Administrative Items To     : owner-lightwave@webcom.com